Triángulos rectángulos en la obra
Two things on a job are right triangles in disguise: a corner you need to prove square, and an offset in a pipe or a cable tray. Both come down to one sentence — the square on the long side equals the two squares on the short sides added together — and one shortcut that lets you skip the squaring entirely.
The one sentence: a² + b² = c²
- c = √(a² + b²)the long side from the two legs
- b = √(c² − a²)a leg from the long side and the other leg
- 3-4-53² + 4² = 9 + 16 = 25 = 5². No square root needed.
Three worked examples
1. Squaring a layout with 3-4-5
- From the corner, mark 3 ft along one line and 4 ft along the other. (Use 6 and 8 for a bigger, more accurate check.)
- Measure the diagonal between the two marks.
- If it reads exactly 5 ft (or 10 with the doubled marks), the corner is square. Long, the angle is open; short, it is closed. Diagonal = 5 → square.
Why it works
3² + 4² = 9 + 16 = 25, and 25 = 5². A triangle whose sides fit a² + b² = c² must have a right angle between a and b — that is the theorem run backwards. Any multiple works too: 9-12-15, 30-40-50.
2. The travel of an offset — rise 6", run 8"
- The rise (how far over) and the run (how far along) are the two legs. The pipe between the bends is the hypotenuse.
- c = √(6² + 8²) = √(36 + 64) = √100.
- 10" of pipe between the bend centres. (A 3-4-5 in disguise: 6-8-10.)
3. Where the 45° multiplier comes from — rise 7"
- At 45° the two legs are equal: rise 7", run 7".
- c = √(7² + 7²) = √(49 + 49) = √98 = 9.9".
- Notice 9.9 ÷ 7 = 1.414. That ratio is the same for every 45° offset — it is √2, and it is the multiplier the trade quotes. travel = rise × 1.414.
And the other angles
At any angle, travel = rise ÷ sin(angle). sin 30° is 0.5, so the multiplier is 2. sin 60° is 0.866, so 1.155. sin 22.5° is 0.383, so 2.613. You never need to derive them at the bender — but when you can, you stop mixing them up. The offset math drill practises rise × multiplier.
Try one: legs of 9" and 12" — the long side?
√(81 + 144) = √225 = 15". A 3-4-5 scaled by three.
Drill it
Two legs, find the long side — or the long side and one leg, find the other. Within 1% counts. About half the questions are 3-4-5 families so you learn to spot them.
Your units are set to metric, so the drill asks in millimetres — a 3-4-5 becomes 300, 400 and 500 mm. Pythagoras does not care which unit the sides are in, as long as all three are in the same one.
En esta visita
- Nivel
- Respondidas
- Correctas
- Racha
- Mejor
- Última ronda
Guardar estos resultados
Enviamos este único correo a través de nuestro proveedor de correo y no guardamos su dirección a menos que marque la casilla.
Enviamos este único correo a través de nuestro proveedor de correo y no guardamos su dirección.
Este ejercicio necesita JavaScript para generar y calificar las preguntas. Actívelo para practicar — la explicación de abajo sirve de todos modos.
Preguntas frecuentes
What is the 3-4-5 rule?
A triangle with sides of 3, 4 and 5 — in any unit, and any multiple — has a perfect right angle between the 3 and the 4. Measure 3 along one wall, 4 along the other, and if the diagonal between those two points is exactly 5, the corner is square. 6-8-10 and 9-12-15 are the same rule at a size you can actually measure on a floor.
Why does the offset multiplier for 45° come out to 1.414?
Because at 45° the rise and the run of the offset are equal, so the travel is the hypotenuse of a right triangle with two equal legs. Pythagoras: travel² = rise² + rise² = 2 × rise², so travel = rise × √2 = rise × 1.414. Every offset multiplier is that same idea at a different angle — 1 divided by the sine of the angle.
Do I need trigonometry for this?
For 3-4-5 and Pythagoras, no — just squaring and a square root. For the angle multipliers, the sine of an angle is where the number comes from, but on the job you use the multiplier, not the sine. Knowing where it comes from is what stops you misremembering it.
Ver también
- Offset math practice — rise × multiplier, drilled.
- Formula sheet: bending multipliers — the multipliers derived, printable.
- All trade math lessons
¿Ve algo incorrecto en esta página? Repórtelo
Gracias — su reporte fue enviado.
No se pudo enviar. Vuelva a intentarlo más tarde.
Avisos de herramientas que le sirven — por correo, opcional
Deje su correo y marque la casilla para recibir un aviso breve, como máximo cada dos semanas, sobre herramientas, ejercicios y diagramas que encajan con lo que ha estado estudiando — aquí y en bentright.com y fieldcalc.net. Es la misma lista para los tres, se sale con un clic y no se envía nada hasta que confirme desde su bandeja de entrada.