Quatrième année13 items · about 3 hours
Fourth-year electrical apprentice
Fourth year is the industrial end of the trade and the run-up to your certificate of qualification. Drives and what trips them, power quality, controls troubleshooting and instrument loops; emergency power and hazardous locations as ideas; the arithmetic behind services and fault current; relaying; and then how to find anything in the code book and walk into the exam ready.
Comes after: Third year
The lessons, in order
- How a VFD works Rectifier, DC bus, inverter and PWM: how a drive makes variable frequency, and why volts-per-hertz matters.
- VFD parameters and troubleshooting The nameplate parameters, accel/decel, the common trips (overvoltage, overcurrent, ground fault) and what causes them.
- Power quality and harmonics Sags, swells, transients and harmonics: where they come from, what they do to neutrals and transformers, and how to see them.
- Troubleshooting industrial controls Half-splitting a control circuit, reading voltage across open contacts, and the PLC I/O lights as a meter.
- Instrumentation and the 4–20 mA loop Why a current loop, live zero, two-wire transmitters, scaling, and measuring a loop without breaking it.
- Emergency and standby power Generators, transfer switches, UPS and unit equipment — what each is for and why the circuits are kept apart.
- Hazardous locations: the ideas Why a spark matters, how locations are classified (Class/Division and Zones), and the protection concepts behind the equipment.
- Services and the load calculation method Connected load, demand, and the steps of a dwelling or commercial calculation — with every table value your own.
- Available fault current Where short-circuit current comes from, the infinite-bus estimate from %Z, and why it sets the equipment rating question.
- Protective relaying concepts CTs and PTs, overcurrent, differential and ground-fault relays, device numbers, and what a relay actually trips.
- Finding it in the code book How the book is built, the index as a skill, reading a rule reference down to its item, and the tabs that save minutes.
- Exam prep strategy A study plan backed off from exam day, timing on the day, the calculation habit, and how to use practice questions.
- Fourth-year review quiz Every fourth-year question, mixed, with explanations — then widen it to the whole program.
Tools for this year
- Power factor correction calculator kVAR needed to go from one power factor to another, the current it saves, and the capacitance per phase.
- Transformer fault current (infinite bus) The most short-circuit current a transformer can deliver at its terminals, from its kVA, voltage and %Z.
- Voltage unbalance calculator Percent unbalance from three line voltages or currents, by maximum deviation and by the negative-sequence method.
- 4–20 mA scaling calculator Loop current to process value and back, percent of span, and the voltage across a sense resistor.
- VFD frequency & speed calculator Shaft speed at a drive frequency (or the frequency for a speed), volts-per-hertz and output voltage.
- Load calculation helper Walks the load-calculation method with every factor from your own code book: basic load, demand, extras, amps.
How to use this year
The first five lessons are the plant floor; lessons six to ten are the design side you will be examined on; the last two are about the exam itself. The load-calculation and fault-current lessons teach the method — every table value and demand factor is typed in from your own code book, so the method works under CSA C22.1 and the NEC alike, and never goes out of date on a code cycle. When you are done, the practice exam mixes every question from the whole program.
Vous voyez une erreur sur cette page? Signalez-la
Merci — votre signalement a été envoyé.
L’envoi n’a pas fonctionné. Veuillez réessayer plus tard.
Un petit mot sur les outils qui vous conviennent — par courriel, facultatif
Laissez votre courriel et cochez la case pour un petit mot, au plus toutes les deux semaines, sur les outils, exercices et schémas qui vont avec ce que vous étudiez — ici et sur bentright.com et fieldcalc.net. Une seule liste pour les trois, un clic pour la quitter, et rien n’est envoyé avant que vous confirmiez depuis votre boîte de réception.