You have a question about a specific kind of installation, and you find a general rule that seems to answer it. What should you check before you trust it?

B. Whether a section written for that specific installation amends or overrides the general rule

A. Nothing — general rules always apply

C. Whether the rule is in bold type

D. Whether the rule is older than the table

What is usually the fastest reliable way into a code book for a topic you have not looked up before?

B. The index, looked up by the thing itself (e.g. the device or location), then the rule it points to

A. Flip pages until you find it

D. Search your memory for the rule number

A rule reference is written as a section-rule number followed by a subrule in brackets and then a lettered item. Why does reading it down to the item matter?

B. Because the requirement you need is often in one subrule or item, and neighbouring items can say something quite different

A. It does not — the rule number is enough

C. Because the item letter tells you the edition

D. Only inspectors need the item

You find the table you need, but there are notes at the bottom of it. What should you do with them?

B. Read them: they often change how the table is applied or limit when it applies

A. Ignore them — notes are advisory

C. Only read them if the question mentions notes

Where would you look to confirm exactly what a word like "accessible" or "dwelling unit" means in the code?

B. The definitions section at the front of the book (or the start of the relevant section)

What are the appendices (or annexes) at the back of a code book generally for?

B. Explanatory notes, background and guidance that help you apply the rules — useful, but check whether your jurisdiction treats them as mandatory

A. They contain the only enforceable rules

Your exam allows a tabbed code book. What is a good tabbing plan?

B. A small number of consistent tabs: the major sections, the tables you use most, the definitions and the index — colour-coded, not written over the text

C. No tabs — they slow you down

Quatrième année Lesson 11 of 12 · about 13 min

Finding it in the code book

What you’ll learn

How an electrical code book is organised, and why that tells you where to look.
An index-first method for finding a rule you have never looked up before.
How to read a rule reference down to the subrule and item, and why the neighbours matter.
How general and specific rules fit together, and how to tab a book so it opens in the right place.

Before this: Third year

Nobody knows the whole code by heart, and the exam does not expect you to. It expects you to find the right rule quickly and read it properly. That is a skill, and like bending conduit it gets fast with practice. This lesson is about the book as a tool — how it is built and how to move around it — for whichever code you work under: CSA C22.1 (the Canadian Electrical Code, Part I) with your provincial amendments, or the NEC with your state or local ones. There is no code text on this page; open your own book beside it.

How the book is built

The general shape of an electrical code book, front to back. The names and numbers differ between books; the order of ideas is much the same.

Definitions. Code words mean exactly what the definitions say. Read them when a word matters.
General rules. The requirements that apply to all installations — the default.
Specific sections. Wiring methods, particular equipment, particular occupancies and special conditions. They add to or change the general rules for their case.
Tables. Where most of the numbers live — and where the notes under the table often change how it is used.
Appendices or annexes. Explanations, intent, worked methods and references. Often informative rather than mandatory; the book says which.
Index. Your fastest way in.

General versus specific

The single most useful idea: a specific rule written for your situation governs over a general rule that also seems to apply. When you find an answer in the general rules, ask “is there a section for this kind of equipment, location or occupancy?” and check it. Exam questions are often written so the general rule gives a tempting wrong answer.

A method for finding anything

Name the thing. Turn the question into nouns: the equipment, the location, the wiring method, the hazard.
Index first. Look up the most specific noun. If it is not there, try another name for it.
Read the rule it points to — all of it. Down to the subrule and item, then the items either side.
Follow the references. “See Rule…”, “see Table…”: go and look, and read the table notes.
Check for a specific section. Does a section for this occupancy, equipment or condition amend what you found?
Check the definitions for any word the answer hangs on.
Write down the full reference — you will want it again, and on an exam it proves your answer.

Reading a rule reference

Rule references are addresses, and like a street address they go from general to exact. The Canadian code writes them as a section number and a rule number, then a subrule in brackets, then lettered items and roman-numeral sub-items. The NEC writes an article and section, then lettered and numbered list items. Either way, the requirement you need is usually at the bottom of the address, and the item next door may be the opposite case.

Worked: timing a lookup

Say a practice exam gives you 150 questions in 4 hours: 240 minutes ÷ 150 = 1.6 minutes a question, about 96 seconds.
If one in three questions needs the book, that is 50 lookups. At 3 minutes each that is 150 minutes — more than half the exam on lookups alone.
Cut each lookup to 90 seconds with a good index habit and tabs: 50 × 1.5 = 75 minutes, saving 75 minutes for the calculation questions.
The lesson: lookup speed is exam time. Practise it with a clock, the way you would practise any other skill.

Tabbing the book

First check what your exam body allows — some permit tabs and highlighting, some limit what may be written in the book. Then keep it lean: one colour for the major sections, one for the tables you use most, one for the definitions and the index. Label tabs with a word, not a rule number, so they still work after the next edition renumbers things. A book with sixty tabs is slower than a book with none.

Sur le chantier

Tips

Carry the edition your jurisdiction has adopted, plus its local amendments — not the newest one on the shelf.
When you look something up on site, write the reference on the drawing or in your notes.
Read the appendix note for a rule you do not understand; it often explains the intent in plain words.
Practise lookups with a timer: pick a practice question, find the rule, note how long it took.

Common mistakes

Stopping at the first general rule and missing the specific section that changes it.
Reading the table and skipping its notes.
Reading the rule number but not the subrule and item the question actually hangs on.
Using the everyday meaning of a defined word.
Over-tabbing, or writing in the book in a way the exam does not allow.

Check yourself

0 right of 0 answered 7 questions · pick one answer each

1.You have a question about a specific kind of installation, and you find a general rule that seems to answer it. What should you check before you trust it?
2.What is usually the fastest reliable way into a code book for a topic you have not looked up before?
3.A rule reference is written as a section-rule number followed by a subrule in brackets and then a lettered item. Why does reading it down to the item matter?
4.You find the table you need, but there are notes at the bottom of it. What should you do with them?
5.Where would you look to confirm exactly what a word like "accessible" or "dwelling unit" means in the code?
6.What are the appendices (or annexes) at the back of a code book generally for?
7.Your exam allows a tabbed code book. What is a good tabbing plan?

Answers

B. Whether a section written for that specific installation amends or overrides the general rule — Code books are built general-first, with later sections for particular occupancies, equipment or conditions that add to or change the general rules. The specific section wins where it speaks. Stopping at the first general rule you find is one of the commonest exam errors.
B. The index, looked up by the thing itself (e.g. the device or location), then the rule it points to — The index is built for exactly this, and it cross-references synonyms. Look up the noun — the equipment, the location, the wiring method — and follow it to the rule. Then read around the rule for exceptions and references.
B. Because the requirement you need is often in one subrule or item, and neighbouring items can say something quite different — A single rule can contain several subrules and items, each with its own condition. The exam and the inspector both mean a specific one. Read the full reference, then read the items either side so you know which condition you are in.
B. Read them: they often change how the table is applied or limit when it applies — Table notes frequently carry conditions, adjustments or exceptions that change the answer. Many exam questions are written so the table value alone is wrong and the note makes it right.
B. The definitions section at the front of the book (or the start of the relevant section) — Code words have code meanings, set out in the definitions. An everyday reading of a defined word can send you to the wrong answer. Canadian and US books both keep a general definitions section near the front, and some sections add their own.
B. Explanatory notes, background and guidance that help you apply the rules — useful, but check whether your jurisdiction treats them as mandatory — Appendices and annexes usually explain the intent behind rules, give worked methods or guidance, and point you to related standards. Many are informative rather than mandatory — the book says which. They are often the fastest way to understand a rule you have found.
B. A small number of consistent tabs: the major sections, the tables you use most, the definitions and the index — colour-coded, not written over the text — Tabs are there to cut the seconds it takes to open the book in the right place. Too many and you are hunting through tabs instead of pages. Check your exam body’s rules on what markings are allowed before you add any.

Questions fréquentes

Should I try to memorise the code?

Memorise the shape, not the text. You want to know which part of the book deals with what, how rules are numbered, where the tables and definitions are, and the handful of requirements you use every day. For everything else, the skill that passes exams and inspections is finding the rule quickly and reading it properly — which is why most trade exams are open-book for code questions.

Is the Canadian code organised like the NEC?

In spirit, yes: general requirements first, then sections (or chapters and articles) for particular wiring methods, equipment, occupancies and special conditions, then tables and supporting annexes or appendices. The numbering and the names differ, so learn the scheme of the book you are examined on — CSA C22.1 in Canada, the NEC in most of the US — and your provincial, state or local amendments.

What if the index sends me somewhere that does not seem to answer the question?

Read the rule it points to and follow its cross-references — rules often say “see” another rule or table. Then try the index under a different word: the equipment’s other name, the location, or the hazard. If two rules seem to disagree, check whether one is in a section written for your specific case; that one usually governs.

Voir aussi

Exam prep strategy — what to do with this skill on the day
Journeyman practice exam
Services and the load calculation method — a method that sends you all over the book
Glossaire

Vous voyez une erreur sur cette page? Signalez-la

Merci — votre signalement a été envoyé.

L’envoi n’a pas fonctionné. Veuillez réessayer plus tard.