Esta página aún no está traducida del todo. Lo que falta se muestra en inglés por ahora. Leer la versión en inglés →

First year Basic circuits Free · works offline once loaded

Ohm’s law and power calculator

Type any two of the four — volts, amps, ohms, watts — and the other two appear, with the formula that found them. Plain units: convert kW, mA or kΩ first (1.5 kW = 1,500 W).

Llene dos campos. Deje vacíos los otros dos.

Tensión—
Corriente—
Resistencia—
Potencia—

Para cargas resistivas. En motores y otras cargas de CA, V × I da volt-amperes; para los watts también hace falta el factor de potencia.

Guardar estos resultados

Enviamos este único correo a través de nuestro proveedor de correo y no guardamos su dirección.

How it works

Two laws do all of it. Ohm’s law: V = I × R. The power law: P = V × I. Put one inside the other and every pair of known values has a formula for the other two. The calculator picks the pair you gave it and shows which formulas it used, so you can do the same on paper.

V I × RP ÷ I√(P × R)volts I V ÷ RP ÷ V√(P ÷ R)amps R V ÷ IV² ÷ PP ÷ I²ohms P V × II² × RV² ÷ Rwatts

Worked example

A 1,500 W heater on 120 V

  1. Known: P = 1,500 W, V = 120 V. Want: I and R.
  2. I = P ÷ V = 1,500 ÷ 120 = 12.5 A.
  3. R = V² ÷ P = 14,400 ÷ 1,500 = 9.6 Ω.
  4. Check: I × R = 12.5 × 9.6 = 120 V. ✓

Only ohms and watts known

  1. A 10 Ω resistor must not dissipate more than 5 W. What is the most current and voltage it can take?
  2. I = √(P ÷ R) = √(5 ÷ 10) = √0.5 = 0.707 A.
  3. V = √(P × R) = √(5 × 10) = √50 = 7.07 V.

Preguntas frecuentes

Why can I only enter two values?

Two is all it takes: volts, amps, ohms and watts are tied together by V = I × R and P = V × I, so any two fix the other two. Enter a third and it might disagree with the first two — the calculator would have to pick which one to believe, so it asks you to clear one instead.

Does this work for motors and AC loads?

For resistive loads — heaters, elements, incandescent lamps, resistors — yes, exactly. For a motor or anything with coils or capacitors, V × I gives volt-amps, not watts; the real power also depends on the power factor. The power triangle calculator handles that.

Can I enter kilowatts or milliamps?

Convert to plain units first: 2.5 kW is 2,500 W, 350 mA is 0.35 A, 4.7 kΩ is 4,700 Ω. Keeping everything in base units is the habit that stops the thousand-times errors.

Ver también

¿Ve algo incorrecto en esta página? Repórtelo

Incluiremos esta página y los números que usted escribió. Leemos cada reporte, pero no podemos responder.

Gracias — su reporte fue enviado.

No se pudo enviar. Vuelva a intentarlo más tarde.